“Skater Dolly With Track Ends” has been added to your cart. View cart
C-Stand Hire Sydney 40″ (Silver)
$20.00
Sydney Camera Hire’s C-Stand 40″ with sliding leg & quick release, including grip and 40″ arm is a steel lighting support with 2 risers and 3 sections that extends to a maximum height of 313 cm.
Also included in the kit is one Grip Arm and one 2.5″ Grip Head, either black or silver as determined by the kit ordered.
Risers: 2
Sections: 3
Fixed Stand Adapter: 5/8 in (16 mm)
Closed Length: 132.5cm
Maximum Height: 313 cm
Footprint Diameter: 95cm
Weight: 9.1 kg
Maximum Load: 10 kg
Sydney Camera Hire’s Nanlite Forza 60C Colour Adjustable LED is a monolight style light fixture with remarkable light output relative to its size, which comes complete with a battery handle and Bowens mount adapter.
The Nanlite Forza 60C innovatively adopts the RGBLAC six-color mixing technology: integrating additional LED beads of Lime/Amber/Cyan into the traditional RGB light source to fundamentally solve the problem of incomplete colour spectrum of light and the near-daylight spectrum is achieved as well.
Sydney Camera Hire are excited to offer the Forza 60C for hire because units saturation strengthens significantly for colours other than RGB in HSI mode, which means that the Forza 60C can have a cutting edge on-color renditions over other RGB/RGBW/RGBWW fixtures. Full spectrum, wider colour gamut, more accurate color reproduction and more subtle light/colour quality in low saturation can all be delivered.
Ultra Bright Output
The 60C employs a COB LED module to output 12810 Lux at 5600K at 1 meter, close to the 13830 Lux of the Forza 60B. With with dimming from 100% down to 1% you can quickly adapt the Forza 60B to any scene without adding ND filters or diffusion.
Mini Mount system
The Forza 60C has a mini mount, which allows you to use all Forza 60 modifiers. The included Bowens adapter will allow you to attach standard Bowens modifiers, making the Forza 60C compatible with a massive selection of light modifiers, including but not limited to NANLITE’s line of softboxes projection mounts, and lanterns.
Lightweight Compact Design
Created to eliminate the difficulties of travelling with large light fixtures the Forza 60C weighs only 1.08kg (not including reflector) and is compact enough to be easily packed into your camera bag.
Practical Effects
The Forza 60C includes 15 different practical lighting effects — HUE Loop, CCT Loop, INT Loop, Flash, Pulse, Storm, TV, Paparazzi, Candle/Fire, Bad Bulb, Fireworks, Explosion and Welding. All of these are designed to enhance your work and save you time creating complex lighting scenarios.
Power Anywhere
Optimized for use in the studio or on location, the Forza 60C can run off either the included AC adapter, the included NPF battery handle using 2 x Sony style NP-F batteries (not included). It can also be powered by an optional D-tap cable plugged into a 14.8V V-Mount battery, or the Optional V-Mount battery handle. With so many power options, you can operate in any location regardless of power availability.
Silent Cooling system
The Forza 60C is equipped with a 60,000 hours lifetime rating. Ensuring the fixture performs at its best for longer. Emitting a low 20dB audible output at full power, it is at home in even the most sound-sensitive situations. Forza 60C also supports turning off the fan to achieve complete silence at lower power outputs.
Battery Handle Included
Operate the Forza 60C with the convenient BH-FZ60 battery handle, and power the light from 2 x NPF Batteries (available separately) Use the Forza 60C with light modifiers that use the common Bowens mount using the included AS-BA-FMM adaptor.
Sydney Camera Hire’s Skater Dolly is the most sophisticated camera mounting platform available today. It is a rugged and portable dolly solution for filmmakers wanting a small footprint on set without sacrificing stability or safety.
The Skater Dolly is all about being on the go weighing only 15 kg, it is easy to carry and quick to setup. It is light enough for one person to handle and just easy enough to manoeuvre on the fly. It is constructed of high-grade aluminium for a more robust yet lightweight build; and supports loads of up to 70 kg.
Sydney Camera Hire’s Skater Dolly comes with 1.5″ speed rail/track, which can be configured into variable lengths of 4ft & 8ft. Compatible speed rail and end truss allows mounting the Dolly on Baby Feet, Long Legs, 5/8″ Pins, Tripod, C-Stand, Light Stand and various grip alternatives in seconds, allowing users to start filming in no time. The camera can be inverted for underslung tracking shots on 4ft track length.
The Dolly’s top mount may be quickly changed between 75mm, 100mm, 150mm Bowl or Mitchell Mount configurations to accommodate nearly any camera head type. 1/4″ -20 & 3/8″ -16 threaded holes on the rugged camera platform accommodates all industry-standard connections.
Sydney Camera Hire’s rickshaw dolly is lightweight and portable, and is designed for use with 3-axis Camera Gimbal, Handheld, and Steadicam setups. It enables the camera operator to be pushed/pulled by a grip to capture complicated shots.
The hydraulic twin shock absorbers used on both sides of Rickshaw reduce shocks and provide stabilised shots, making it suitable for smooth or rough surfaces. The seat configuration allows you to have a long follow on the flat surface and then transition on to an uneven surface by stopping and having the operator walk away from the Rickshaw all in one continuous shoot.
The seated position also allows the operator to position the camera to reach floor level for ultra-low shots. The hydraulic seat offers 360-degree movement, height adjustment and four back & forth positions on the platform.
The main wheels feature 3 height adjustment points for adjusting ground clearance at 5” or 6” or 7” that allows the user to adapt the height corresponding to the rough and bumpy roads.
Telescopic Handle with length range from 32”- 54” allows ease of handling to the operator. The platform has 10mm threaded holes and free holes for mounting cheese plate or other accessories. The rickshaw supports 42mm speed rails to install a shock absorber arm with 3-Axis Gimbal.
You can also remove the seat, and mount a 50mm scaffold pole to the platform, to mount compatible gear.